Error code 23 normally appears in different circumstances which also determine how the error is displayed. However, the occurrence of this error follows a general pattern where it is associated with the malfunctioning of adaptors or delays in the starting of certain devices or applications on the system.
Corrective measures employed to correct the error must be in line with the particular circumstances surrounding its appearance.
One of the primary treasons of the appearance of ERROR_CRC is as a result of the a device being recorded as a main display adapter when in actual fact it is a minor display adapter which are usually described using the terms primary and secondary respectively. In such a situation one is informed that the display adapter is operating appropriately. The problem is attributed to the primary adapter with one being advised to check on Properties to view the primary adapter’s characteristics. In such a case one can solve the problem by pressing the properties button.
Error code 23 may also appear when the device is running on a minor display yet the major display adaptor is not being located by the system. One gets the same message as above and is advised that the problem lies with the main adapter. They are then told to fix the primary display adapter after which they should expect it work perfectly. However in the eventuality that the device does not have a display adapter qualities then one will be notified that the device is unable to load the device drivers required for its functioning. One is consequently expected to click on the Update Driver button so as to have the driver fully configured by the system. This is the most appropriate solution in such a case.
On a wider note, error code 23 is said to signal the delay by the device loader to start a certain device. It also fails to inform Windows the timing when the device is deemed ready to begin functioning. Most solutions to this error code can be arrived at by verifying settings for the main display adapter found in Display properties icon. One can also try to resolve the issue by the removal of this as well as the minor adapter for the Device Manager. This should be followed by a restart of the computer to enable Windows to register and configure these devices. This should also verify the existence of current drivers as well as their appropriate installment. Those devices not classified as display adapters, the recommended procedure should be adhered to failure to which one should delete and reinstall the device.
